Solvent free epoxy based surface sealer and primer
Two-component clear epoxy primer for sealing porous substrates before epoxy and polyurethane systems.
Surfaces should be sound, clean, dry and free from loose material, efflorescence, laitance, dirt, oil and grease. New cementitious surfaces should cure at least 21 days and moisture should not exceed 5%
Repair cracks, leveling and voids with suitable Builda Rep S52 products and allow to cure before priming
Stir Part A, then add entire Part B hardener to Part A and mix at 300-400 rpm for 2-3 minutes until homogeneous
Apply to prepared substrate as primer or sealer and allow to become recoatable after the specified interval
