Solvent free epoxy based surface sealer and primer
Two-component brownish epoxy primer for sealing concrete and providing adhesion before coating systems.
Surfaces must be sound, clean, dry and free from loose material, laitance, curing compounds, dirt, oil and grease. New concrete should cure at least 21 days and moisture should not exceed 5%
Metal must be cleaned to white metal by sand blasting and primed immediately before oxidation begins
Add the entire hardener component to the base and mix with low-speed drill at 300-400 rpm for 2-3 minutes until uniform
Apply as primer/sealer to prepared substrate and allow to dry before subsequent coating
