Liquid Applied Waterproofing and Protective Membrane
Single-component liquid-applied hybrid polyurethane waterproofing and protective coating.
Surfaces must be clean and free from dust, dirt, moss, oil, grease and loose particles. Prepare by grit, sand or shot blasting or vigorous wire brushing
Priming is not normally required. For highly porous surfaces, use a diluted primer coat where recommended and allow to dry
Single-component product; mix pail contents thoroughly with slow speed drill and paddle before application to remove sediment
Apply by brush, roller or airless spray in a minimum of two coats. Allow first coat to dry before applying the second coat cross-wise
Clean tools with water after use. Hardened material can be removed mechanically only
